Parts Needed:
1 pc -
#6
RH short Hinge & Mounting Bracket Assembly
1 pc -
#18
LH short Hinge & Mounting Bracket Assembly
2 pcs -
#5
Long Hinge & Mounting Bracket Assembly
Hardware Needed:
16 pcs -
#15
Phillips Rd. Hd. Screw
2 pcs -
#17
Phillips Rd. Hd. Bolt
2 pcs -
#19
Locknut
2 pcs -
#33
Flat Plastic Washer (1/8” Thick)
CAUTION: Hinges must be positioned
exactly as shown or table will not operate
correctly and could be damaged.
Do not overtighten nuts, hinge must pivot.
REPEAT STEPS 4-5 ON THE OTHER ALUMINUM TOP ASSEMBLY.
5. A)
Attach one
LH
short Hinge & Mounting Bracket Assembly (
#18
) using four Screws (
#15
) as shown in
DETAIL C
. Attach one
RH
short Hinge & Mounting Bracket Assembly (
#6
) using four Screws (
#15
) as
shown in
FIGURE 5
. Attach two Long Hinge & Mounting Bracket Assemblies (
#5
) using eight Screws
(
#15
) as shown in
DETAIL D
&
FIGURE 5
.
B)
Attach
LH
short Hinge & Mounting Bracket Assembly (
#18
) and
RH
short Hinge & Mounting Bracket
Assembly (
#6
) to U-Leg (
#1
) using two Bolts (
#17
) with two
Thick
Flat Plastic Washers (
#33
) and two
Locknuts (
#19
) as shown in
FIGURE 5
and
DETAIL C.
DO NOT OVERTIGHTEN
hinge must pivot.
Note:
1/8” Thick Plastic Washer (
#33
) goes between Hinge and Leg.
33
33
(Thick Washer)
