Cypress Table Assembly
The cypress or oak table comes shrink-
wrapped for shipping purposes. Carefully cut
the wrapping and lay out the table pieces.
Look for the hardware package stapled under
one of the table panels.
Unscrew the protective wooden panels
temporarily attached to the table. These were
added for protection during shipping. Dispose
of them.
Place the top of the table down on a smooth
surface and erect the side legs of the table.
Position the locking wheels with the front of the
table as shown. Secure both side leg sections.
Place a bolt through the table and the side leg
stud and secure from the inside using a washer
and nut. Tighten the nut lightly. Later, when all
bolts are in, completely secure the nuts.
Do the same with the middle section of the
table, securing all four corners. On the second
round of tightening, secure the bolt until the
wood becomes slightly compressed.
Getting Started
17
