Primera CX1000 Скачать руководство пользователя страница 42

Страница: 42 / 54

38 Maintenance and Troubleshooting

5. Type the printers IP address in the address bar. To find the printer’s IP address, navigate the

printer's control panel - Network/Ports - TCP/IP - Address.

6.   A printer settings page will appear. Go to the Configuration Menu.
7.   Click on "Color Samples"
8.   Choose "Off CMYK" or "US CMYK". These choices correspond to color matching settings

available in the printer driver.

9. Click Print.
Not all colors will be printed on this job. To focus in more on specific colors you can click the

Detailed Samples button on the color samples screen. This will allow you to enter specific CMYK

values and a variation increment. The smaller the increment, the closer to the original CMYK value

all the swatches will be. We recommend a increment of 2 or 3 when focusing in on specific CMYK

values.

Tip!

When typing in specific CMYK values, we recommend setting K to 0 to get more vibrant swatches.

Note:

Be sure to switch the Size/Type back to Universal/Custom Type 5 via the Control Panel before sending

another print job.

9.2 Color/Alignment Calibration

Color calibration occurs automatically every 500 pages, when a new cartridge or ITU is installed,

if power saver has been on for more than 8 hours and at other points if one of several internal

parameters has exceeded a threshold. You will see the Calibrating... notice on the printers control

panel when the calibration is taking place. This calibration is used for color accuracy and pixel

(print head) alignment. See Section 9.3 for more information on Print Head Alignment.

You can force the printer to perform this calibration using these instructions.

Press Menu on the Printers Control Panel - Select Settings - Select Quality Menu - Select Color

Adjust (last item on list). The printer will calibrate for several minutes.

9.3 Print Head Alignment

Pixel shifting can be caused by a misaligned print cartridge. This usually occurs after a new

cartridge is installed. Try the following:

A. First do an auto alignment from the standard printer control panel. Press Menu - Select Settings

- Select Quality Menu - Color Adjust (last item on list). The printer will calibrate for several

minutes.

B. Perform a manual alignment for the specific color that is out of alignment (usually the same as

the last replaced cartridge) from the Diagnostic menu.

1. On the printer's control panel, set the default source to Tray 1. Press Menu - Select Paper Menu -

Select Default Source - Select Tray 1.

Содержание CX1000























































Результаты поиска

Содержание CX1000

Отзывы:

Похожие инструкции для CX1000

Бренды по названию

Популярные бренды

Primera CX1000, Руководство оператора

Результаты поиска

Содержание CX1000

Отзывы:

Похожие инструкции для CX1000

Бренды по названию

Популярные бренды