Using PTBurn Client to Submit a Job
41
Click
Browse
then select the desired file of type.
You can then browse to the desired file.
If you are using a JPG or BMP designed in another program, here are
some hints for designing a successful label:
·
Create the image as a 118mm by 118mm square. If your
image is too large, the PTBurn Server will automatically
resize it and center it on the disc area. If it is not
symmetrical, it will center it on the disc proportionately so
you may see some white or non-printed areas on the disc.
·
The PTBurn Server will crop the image to the shape of a
disc for you. If you try to crop out areas for the outer and
inner diameter of the disc, and you are not perfectly
accurate you will end up with an egg shaped or
misshapen print area on the disc. If you flood the entire
area of the disc with color, you will have a perfectly
formed print area on the disc.
·
If you want to create a template in a drawing application
such as Illustrator or Corel, start with a 120mm square
document with no margins. Center a 118mm transparent
circle on the document to see the outer diameter of the
disc. If using Primera's TuffCoat discs, center a 38mm
File of Type
Содержание 510869
Страница 1: ...PTBurn Network Software User s Manual 2003 All rights reserved...
Страница 24: ...20 Setting up the PTBurn Server ection 4 Installation and Setup of...
Страница 71: ...Index 67 System Requirements Client 3 System Requirements Server 3 Verify 50...
Страница 72: ...Printed in the United States of America P N 510869...