Primera 510152, Руководство пользователя

Страница: 41 / 48

OEM Internal Mounting 31
Appendix B: OEM Internal Mounting
It is recommended that only qualified OEMs mount the
Inscripta inside a duplicating tower, autoloader or full-height
drive bay. The integration will require physical mounting,
possible modification of the drive bay, power connection and a
means to deliver parallel data and control signals to the unit.
All of these are described in the following sections.
A. PHYSICAL MOUNTING AND POSSIBLE CASE
MODIFICATION
The dimensions below indicate the area required for mounting
the printer. You will need the equivalent height and width of a
full-height (two half-height) drive bay slot. Since many PC-
type cases include rear support tabs for drives, you may need
to remove or bend these tabs or otherwise modify the case in
order to fit the printer in the space. You will also see that the
Optical Disc Printer is deeper than an ordinary disc drive or
CD recorder. Be sure that you have enough depth in your
cabinet before making any other modifications.
5.76 in.
(146.4 cm)
Top View
Side View Front View
Rear View
3.39 in.
(86 cm)
5.87 in.
(149 cm)
13.11 in.
(333.1 cm)
510152.qxd 11/16/01 10:33 AM Page 31