Primera 510152, Руководство пользователя

Страница: 21 / 48

Ink Ribbons and Optical Media 11
D. PRINTING A SELF TEST
Now that the printer is set up and print supplies are loaded, a
self test should be performed to check for proper operation of
the printer. A sample of the self-test print is shown below.
Refer to the following steps to run a self test:
1. If power has already been applied, remove it by
unplugging the power plug on the rear panel of the printer.
The LED status light should be OFF. Verify that a ribbon is
loaded and that a CD has been placed in the CD Tray .
Also, disconnect the interface cable from the printer if
connected.
2. Press and hold the CD Tray button as you insert the power
plug into the power jack.
3. Continue to hold the CD Tray button down for a few
seconds, until you hear the self-test begin to print.
510152.qxd 11/16/01 10:33 AM Page 11