PrimeArray 4xxx, Руководство пользователя

Страница: 87 / 208

Hot-swapping
5.10 Hot-swapping
You may have to change hard disks in some situations, such as
hard disk failure, degraded RAID or general maintenance. The
NAS system supports HDD hot-swapping if used with MR-423I
hot-swappable HDD module. Below are the instructions of
replacing hard disks when using the HDD module.
When using MR-423I hot-swappable HDD module:
1.
Identify which hard disk fails. The amber LED of the HDD
tray will blink to indicate hard disk failure.
2.
Turn off the failed HDD by pressing the red button on the
HDD tray.
3.
When the amber LED is steady on, it is ready for being
unplugged. Unplug the HDD tray and replace the HDD
with a good one.
4.
Plug in the HDD tray. Wait until the Green LED is steady
on. Then you are done.
Chapter 5
77