PrimeArray 4xxx, Руководство пользователя

Страница: 193 / 208

Discovering NAS system
Discovering NAS system
When startups, NAStart automatically discover all the NAS
systems on the network and display a list of server under the
node Local Server. NAStart will automatically refresh the server
list at a specified interval. The default interval is 10 minutes.
NAStart can also locate NAS servers by IP addresses. It is useful
when NAS servers are on the Internet or located in different
network segments from the NAStart. To locate NAS servers by IP
addresses, select
Remote NAS List from the File menu. Click the
Add button and enter the IP address of the NAS server.
To set the automatic refresh interval
1. Go to Tool NAStart Options menu.
2. Enter a number between 1 to 60 minutes.
3. Click
OK .
Server Quick Setup Using NAStart
You can perform initial setup for your NAS system using NAStart.
1. Click the button on the toolbar.
2. Or, go to Server -> Server Quick Setup.
3. Select a NAS Server from the server list and click Next
button.
4. Choose the Network Teaming Mode from the pull down
menu. If you are not clear about this feature, continue with
the default value. (Refer to Chapter
٤٫٢
TCP/IP Settings)
5. If you want the IP settings to be assigned automatically,
click Obtain IP settings automatically.
6. Or , you can specify the IP settings manually.
7. Click Next button to go to the next page.
8. Enter the Server Name , Server Comment , and
Workgroup/Domain Name and select either the
Appendix B Utility for NAS system
183