PrimeArray 4xxx, Руководство пользователя

Страница: 66 / 208

SNMP Settings
4.9 SNMP Settings
Simple network management protocol (SNMP) provides the
ability to monitor and gives status information of the SNMP
agent to the SNMP management console. NAS system
behaves as an SNMP agent that answers requests from
management console and sends trap information to it.
The following options should be configured to using SNMP
protocol:
Community: A name serves as a simple authentication. The
communication between the SNMP management console
and the NAS system cannot be established if the community
names are mismatch.
IP: IP address of the SNMP management console
Trap: A trap is a voluntary message send out from a SNMP
agent (which is in this case your NAS system) when there is an
event occurred.
Management: Configure the SNMP management console as
Read Only or Full Control .
Location: Provide location information of the SNMP agent.
Contact: Provide name of the contact person who has the
management information of the SNMP agent.
Configuring SNMP Settings
1. Click
the Enable SNMP Protocol checkbox to enable
SNMP accessing.
2. Enter a Community name.
3. Enter the IP address of the management console.
Chapter 4
56