PrimeArray 4xxx, Руководство пользователя

Страница: 31 / 208

Installing the 4U Rack-mount Model
4. Insert the HDD tray back in the HDD module. Make sure
the lever of the HDD module is properly in place.
5. Repeat Step 1 to Step 3 if necessary for the other HDD
tray.
6. Install the provide rack mounting handles at both side of
the NAS system.
7. Install the NAS system in the rack.
8. Connect your NAS system to the network by attach a
LAN cable from the LAN port located at the back of your
NAS system.(At least one network connection is required)
9. Plug the power cord into the power connector on you
NAS system.
10. Make sure the power switch on the power supply is in on
position.
11. Press the power button on the upper right hand corner of
your NAS system.
12. Wait for the server to boot up. The boot up process takes
approximately 2 minutes.
Note : It is recommended that rear support bracket on
the cabinet should be used when installing the 4U rack
model
Sliding Rails Installation
1.
Make sure that you have the following the mounting
parts for the sliding rails.
•
4 L-shaped brackets (see the left side of the photo)
•
8 long screws and washers (see the upper right
side of the photo)
Chapter 2
21