PrimeArray 4xxx, Руководство пользователя

Страница: 81 / 208

SmartExtend – Add More NAS Capacity
- on the SmartExtend initiator system
1. After getting the license key, go to the Server*License
page to enter the license key and activate the feature.
2. Go to the Server General page. Change the
SmartExtend mode to NAS with SmartExtend Initiator .
- on the SmartExtend target system
3. Go to the Server General page, change the SmartExtend
mode to SmartExtend Target .
4. Go to the Volume Create page, create a JBOD or RAID
volume. It is suggested to create hot-spare disks after you
create a RAID-1 or RAID-5 volume.
5. Check the Volume Information page and make sure that
the volume is created successfully.
6. Go to the Volume SmartExtend page. Export the target
volume by clicking the Export Volume button.
(a) First specify the target volume to be exported.
(b) Specify the group who can use the target volume. A
SmartExtend initiator must provide a user account
when it tries to use the target volume. The user
account must be a member of this group.
(c) Specify a SmartExtend initiator which will connect to
this target volume.
(d) Apply the settings.
7. On the Volume SmartExtend page, you will see the target
volume in the list, but the Status column will show
Disconnected . You will need to build the connection from
the SmartExtend initiator side.
- on the SmartExtend initiator system
8. Go to the Volume SmartExtend page, click the Add
button.
(a) Choose the SmartExtend target system from the
SmartExtend Target List or specify the IP address
manually. Click the
Next button.
Chapter 5
71