- 16 -
Setting the Clock
The built-in clock shows the correct time in the display.
1. Press the clock button (CLOCK ) twice on the remote control, the hour indicator will blink.
2. Set the hour by tuning backward button (TU-) or tuning forward button (TU+).
3. Press the clock button (CLOCK) on the remote control, the minute indicator will blink.
4. Set the minute by tuning backward button (TU-) or tuning forward button (TU+).
5. Press the clock button (CLOCK) on the remote control, the built-in clock starts operating and the seconds start
counting from 0.
Note:
* You can set the clock in standby mode.
* The operating time of every step shouldn't be longer than 3 seconds or it will return to the original display.
* If there is a power failure or the power system is turned off, the clock loses its setting.
* When DVD function is selected, please do not use the remote control to set the clock, otherwise, the DVD will
fast forward or fast backward.
To confirm the clock time
If you press the clock button (CLOCK ) on the remote control, the clock time is displayed. Wait for a second until the
display returns to the original display.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes while it is playing. By setting the sleep
timer, you can fall asleep to music and know that your system will turn off by itself rather than play all night.
1. Play a disc or tune in to the desired station.
2. If you set the sleep timer first, each time you press the sleep button (SLEEP) on the remote control, it changes the
number of minutes shown on the VFD in this sequence:
If you change the sleep timer, each time you press the sleep button (SLEEP) on the remote control, it changes the
number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as before setting the
sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When the sleep button (SLEEP) on the remote control, the remaining sleep time is displayed. Wait for a second until
the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (SLEEP) on the remote control until the 00 displays on the VFD.
Resetting the clock or turning off the system also cancels the sleep timer.
- -
10
20
...
80
90
00
- -
15
10
20
...
80
90
00
All manuals and user guides at all-guides.com
