9
In the event of electrical failure, a manual emergency release is located at the front edge of the
docking station. Push the red release arm to one side and hold it there while the wheelchair
moves away.
A cable-activated manual operating lever can also be fitted (accessory). The red release arm is
also pushed to one side and should be held there whilst the wheelchair moves away.
An emergency release tool in red is delivered with each docking station. This has to be pushed
into the docking station, between the lock plate of the wheelchair and the docking station to
release the wheelchair.
Release from the docking station
1
When the vehicle has been brought to a halt, remove the safety belt.
To unlock commence by driving the wheelchair forward to release pressure on the lock pin and
then press the red release button in the control panel. The locking pin will be triggered/ released
for approx. 5 or 8 seconds, after which the locking pin is automatically locked/activated again.
Do not attempt to reverse out of the docking station until the red LED on the control module,
which indicates the unlock position, has been illuminated.
Move the wheelchair away from the docking station within this 5 or 8 second period.
If the locking pin is not released when you press the red button in the control panel:
1
2
3
2
3
Warning!
Attempting to reverse the wheelchair before the red LED has been illuminated will
result in blocking the docking stations lock mechanism which makes it impossible
to reverse. If this happens repeat above unlocking procedure.
The docking station, belts and components should be inspected at least once a
year in accordance with the maintenance interval and documentation.
Section 2: Operation (cont.)
These instructions are from the DAHL User Manual located at
https://dahlengineering.dk/media/238906/503744-dahl_manual_mkii_uk_420.pdf
