Dahl Docking Systems Lock Plate Kit Contents (provided by Dahl Engineering):
- Safety Glasses
- Metric Hex Key Set
- Calibrated Torque Wrench
- T27 Torx Socket Bit
- Utility Knife
Ref
Part Description
Qty
A
B
C
D
E
n/a
5 mm Thick Spacer Board
M8 Custom Nut
8 mm Thick Spacer
Locking Plate
M8 Torx Screw, 35 mm
*Dahl #502378
2
5
1
1
5
1
A
B
C
D
E
Torx
- Heavy Duty Scissors
- Ruler / Straight Edge
- Power Grinder
- Hack Saw
- Loctite 222 (or equivalent)
The new hardware provided with the Installation
Kit MUST be used for installation.
TIP: When the camera icon is present, take a few pictures before proceeding. These
pictures can be used as a reference for reassembly.
- Measuring Tape
- Marking Pencil
- Double-sided Adhesive Tape
Tools / Material Requirements per Dahl Engineering (not provided):
*Dahl #502378 not shown. Visit Dahl Engineering’s
website at
https://dahlengineering.dk
for
additional information.
Kit Contents &
Tools / Material Requirements
2
