The new hardware provided with the Installation Kit MUST be used for installation.
2
4
If screw threads protrude through the nut, flush mark the screws to the top of the nuts.
1
Assemble the Docking System onto the power base. Additional spacers (not included) can be
applied if necessary to achieve the desired clearance.
Apply Loctite 222 (or equivalent) to the screws and reassemble the Docking System onto the
power base.
Torque the hardware to
18 N • m (13.3 ft • lb)
.
3
Disassemble the system and cut the marked screws with a grinder or hacksaw.
1
Threads protruding through the nut may damage batteries.
2
3
4
222
4
Torque to
18 N • m (13.3 ft • lb)
Torx
Just the main frame
is shown for clarity.
Spacer
Lock
Plate
Custom
Nuts
Test that the proper clearance is achieved by connecting to the docking station.
Torx
Just the main frame
is shown for clarity.
Spacer
Optional Spacers
(Not Included)
Lock
Plate
Custom
Nuts
Section 1: Assembly Instructions
per Dahl Engineering
5
