2
ULTRASUITE ARRAY - Manual
|
priceindustries.com
ULTRASUITE ARRAY
PRE-INSTALLATION INSTRUCTIONS AND CHECKLIST
Read and Save These Instructions
Warning
•
To reduce the risk of fire, electrical shock, or injury to persons, observe the following:
•
Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes
and standards, including fire-rated construction.
•
Unit must be used in supply applications only, and access above the ceiling is required.
Before you start
•
Inspect all cartons and boxes for flaws and shipping damage.
•
If anything is found to be damaged, contact the shipping company and file a freight claim.
•
Review Price project specific submittals to ensure booms are located in the correct locations (recommended to measure
and chalk outline of ceiling system on floor).
•
If drywall perimeter is installed prior to the system, ensure that the opening is cut to the correct dimensions (as per the
submittal), and is square on all corners.
•
Ensure all tools (as listed below) are on site and ready for use.
•
A minimum of two (2) people will be required to install this system.
Required Tools/Parts
•
To be supplied by contractor.
•
(2+) 8 ft. ladders or scaffolding
•
Laser level
•
Cordless drill/impact
•
#8 self-tapping screws (1/2 in. maximum length)
•
Screwdriver bit(s) to suit self-tapping screws
•
Allen keys (5/32 in. and 3/16 in.)
•
Damp cloth(s) (for cleaning)
•
Utility knife
•
Chalk line
•
Pliers with wire cutter
•
Tape measure
•
Clamps/locking plier
•
Pre-stressed 12 gauge suspension wire (or approved alternative) with necessary equipment to hang wire
•
Supplied by Price:
•
Job specific submittal drawing showing all sizes and dimensions of module assembly sections
•
Luminaire module sub-assembly sections (refer to job submittal drawing for quantity and sizes)
•
Remote driver cabinets (refer to job specific submittal drawing for quantity, sizes and field wiring connection details)
•
Dimmer switches (refer to job specific submittal drawing for quantity and field wiring connections)
•
HGWC Perimeter ceiling sections (if applicable)
•
1/32 in. x 3/4 in. (t x w) white gasket tape – for between modules (Part Number 042373 004)
•
The following supplied for bolting module assemblies together:
•
Bolt
•
Metal washer
•
Lock nut assembly
