10
ULTRASUITE ARRAY - Manual
|
priceindustries.com
ULTRASUITE ARRAY
INSTALLATION INSTRUCTIONS
Electrical Connections
WARNING! SHOCK HAZARD! MAY RESULT IN SERIOUS INJURY OR DEATH. TURN OFF POWER AT CIRCUIT
BREAKER BEFORE INSTALLING THE UNIT.
• Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and
standards.
• When cutting or drilling into wall or ceiling do not damage electrical wiring and other hidden utilities
Step 1:
Remove enclosure box cover (Four screws ¼-20 x ¾ in. Hex Head).
Step 2:
Wire the high voltage side of each remote driver control box according to appropriate wiring diagram.
NOTE:
Wiring should be carried out by a certified electrician and meet national and local electrical codes.
FIGURE 23: REMOTE DRIVER CABINET EQUIPMENT LAYOUT
FIGURE 22: REMOVE REMOTE DRIVER CABINET FACE
High Voltage
Terminal Blocks
Low Voltage
Terminal Blocks
Barrier
Low Voltage
Connection
Knockouts
High Voltage Connection
Knockouts
