PREVOST X3-45 2017, Руководство оператора

Страница: 71 / 227

Controls and Instruments
PA1627 X3-45 Operator’s Manual
4-29
19T
NOTE
19T
If CAM or NAV is already activated, DVD, TV
or VIDEO IN cannot be selected and
displayed.
OPERATION OF THE OPTIONAL AUDIO–
VIDEO MODESTY PANEL
On some vehicles, it is possible to connect and
display on the main monitor a laptop or other
audio-video equipment (DVD player, gaming
console) from an optional audio-video modesty
panel located behind the driver’s seat.
To do so, connect the laptop to the modesty
DB9 connector (9 pins, blue connector), select
Video IN on the Video and Sound Selector and
turn on the laptop presentation mode.
Devices using RCA connectors (DVD, gaming
console) can also be used by connecting them
to the 3 modesty RCA connectors and selecting
the Video and Sound Selector TV mode.
OPERATION OF THE PANORAMIC VIEW
CAMERA
1. Press
CAM
button to select the
optional panoramic view camera
signal. The video section of the
vss-05 lcd panel will show
“CAM”. The video monitors turn
on automatically.
2. Press CAM button again to turn
off the panoramic view camera
and return to previous
audio/video source.
DISPLAY OF THE GPS NAVIGATION
GUIDANCE SCREEN
Not applicable
19T
NOTE
19T
When CAM or NAV is selected, the previously
selected audio source remains active.
OPERATION OF THE DRIVER MICROPHONE
1. Press D-MIC button to turn on
the driver microphone. The
audio section of the lcd panel will
show “D-MIC” and a gong sound
can be heard.
2. Turn volume knob to adjust
microphone level.
3. Press D-MIC button again to turn
off the driver microphone.
OPERATION OF THE GUIDE MICROPHONE
1. Press G-MIC button to turn on
the guide microphone. The audio
section of the lcd panel will show
“G-MIC” and a gong sound can
be heard.
2. Turn volume knob to adjust
microphone level.
3. Press G-MIC button again to
turn off the guide microphone.
19T
NOTE
BACKGROUND VOLUME ADJUSTMENT
19T
When a microphone is activated, the current
audio source volume will reduce to a certain
level which has been set at the factory. To
adjust this level, proceed as follows:
1-
19T
Press and hold AUDIO button then
press AUDIO IN button.
19T
The LCD panel
will show “BACK GROUND”.
2-
19T
Turn the volume knob to adjust the
background level.
3-
19T
Press any button to save the setting. If
no button is pressed within 8 seconds,
the unit automatically saves the setting
and exits this mode.
GONG SOUND LEVEL
A
19T
gong will sound in the passenger’s area upon
activating of the microphone. This gong will also
sound when a passenger activates the service
bell. The gong sound level can be adjusted as
follows:
1-
19T
Press and hold AUDIO button then
press VIDEO IN button.
19T
The LCD panel
will show “GONG PASS”.
2-
19T
Turn the volume knob to adjust the gong
level.
3-
19T
Press any button to save the setting. If
no button is pressed within 8 seconds,
the unit automatically saves the setting
and exits this mode.
19T
NOTE
While maintaining the service bell gong active,
the gong sound heard upon activation of the