PREVOST LE MIRAGE XLII, Руководство по обслуживанию

Страница: 598 / 1342

WARNING Wheels that are not properly
installed or maintained may not work
properly.
Failure to follow proper wheel installation
or maintenance practices may result
in injury or death.
Follow the proper wheel installation and maintenance
practices as contained in this Alcoa Service Manual.
For additional copies of the manual, available free
of charge from Alcoa, or for the most recent updates,
contact Alcoa Wheel and Forged Products
at 1-800-242-9898 option 1 or on the web
at www.alcoawheels.com.
To obtain Alcoa rim flange wear gauge(s) at no charge
and information on free training on proper installation
and maintenance procedures, contact Alcoa Wheel
and Forged Products at (800) 242-9898 option 1 or
on the web at www.alcoawheels.com.
LIMITED WARRANTY
FOR HEAVY DUTY TRUCKS, TRUCK TRAILERS,
BUSES, RV and MOTORHOME WHEELS
(Wheels with bead seat diameters measured in .5 inch
increments and Alcoa tube type wheels)
Alcoa warrants to the original purchaser, from Alcoa or its authorized distributor, that a
new Alcoa aluminum disc heavy duty truck, truck trailer, bus, 19.5-inch and 22.5-inch RV
or motorhome wheel is free from defects in material and workmanship. Alcoa agrees,
without charge, to repair or replace a wheel that fails in normal use and service because
of defects in material and workmanship. Truck, truck trailer, Dura-Flange
® and the Dura-
Bright ® surface treatment wheels not used in transit service are warranted for 60 months
from the date of manufacture as shown on the wheel except the Dura-Flange ® rim flange
treatment is warranted for a period of 24 months. Alcoa bus mount wheels (10-hole,
11.25 inch bolt circle, 8.670 inch hub bore with 1.22 inch diameter bolt holes) and other
wheels used in transit service are warranted for 120 months from date of manufacture,
except the Dura-Bright
® surface treatment on bus and transit service wheels is warranted
for a period of 60 months from the date of manufacture and the Dura-Flange ® rim flange
treatment is warranted for 24 months. Satin finish, polished and Dura-Bright ® surface
treatment 19.5-inch and 22.5-inch RV and motorhome wheels are warranted for 120
months from the date of manufacture as shown on the wheel. Alcoa does not warrant and
will not repair or replace or make adjustment with respect to any wheel that has been
subjected to misuse or abuse including the following:
(a) Using a tire that is oversized according to standards recommended by the Tire and
Rim Association, Inc. or other recognized tire and rim agencies such as ETRTO
(Europe) or others;
(b) Loading the wheel beyond the applicable maximum wheel load as specified by Alcoa;
(c) Inflating beyond the applicable maximum as specified by Alcoa;
(d) Changing the original condition of the wheel by alteration or by subjecting it to any
processing such as welding or straightening.
(e) Accidents, abnormal or severe operating conditions including without limitation tire
fires, brake fires, severe brake system drags or seizures or running with a flat tire; or
(f) Failure to follow maintenance and other instructions and warnings set forth in the
Alcoa Heavy Duty Wheel Service Manual, Alcoa Technical Bulletins and other Alcoa
literature. Recommended maintenance includes, without limitation, using proper
torque, periodic cleaning, polishing, valve replacement, periodic inspection for
damage, loose lug nuts and rim flange wear inspections and procedures.
(g) Nicks, scratches and other surface blemishes resulting from improper maintenance,
cleaning, road debris, curbing, accident or operation are not warrantable.
(h) Damage due to cleaning with abrasives, abrasive brushes, steel wool, scouring pads,
or strong chemicals (acids or alkaline).
Dura-Bright® Surface Treated Wheels are warranted against:
(a) Filiform corrosion (worm or hair like lines, generally milky in appearance, underneath
surface protective treatment and emanating from damage to the surface treatment
such as nicks, scratches or damage from mounting hardware or wheel weights)
(b) Blistering due to loss of adhesion of the surface treatment,
(c) Lift off of the surface treatment due to physical damage (nicks, scratches, gouges)
If nicks, dings, scratches or other damage does occur to the Dura-Bright ® treatment that
exposes the aluminum underneath, the metal exposed may naturally oxidize, but any
corrosion will be confined to the metal exposed and will not extend into or underneath the
Dura-Bright
® treatment.
Normally, any washing materials or chemicals (including mild acid washes) that can
safely be used on a vehicle, its painted surfaces and components, can safely be used on
the Dura-Bright
® surface treatment. The Dura-Bright ® treatment prevents corrosion of
aluminum wheels and protects their shine. So long as the treatment remains in place (see
comments (g) and (h) above) and is maintained in accordance with the Alcoa Dura-
Bright
® Care and Maintenance manual, it is warranted against corrosion. If corrosion does
occur within the treatment warranty period, subject to the limitations stated above, Alcoa
will replace any wheel exhibiting such corrosion.
There is no warranty that the wheel shall be merchantable or fit
for any particular purpose, nor is there any other warranty, express
or implied, except such as is expressly set forth herein.
Alcoa shall not be liable for any incidental or consequential
damages for any breach of warranty, its liability and the purchaser's
exclusive remedy being limited to repair or replacement of the wheel
as stated in this limited warranty.
Alcoa Wheel Service Manual. This limited warranty should be used in conjunction with
the Alcoa Wheel Service Manual and the Alcoa Dura-Bright
®
Wheel Finish Care and
Maintenance Manual. The Wheel Service Manual contains important safety information
and warnings, and failure to read and understand this information may result in serious
injury or death. The limited warranty is included with the Wheel Service Manual, but may
appear elsewhere. If you do not have copies of the Wheel Service Manual you may obtain
copies free of charge from Alcoa Wheel and Forged Products, 1600 Harvard Avenue,
Cleveland, Ohio 44105, (800) 242-9898 and on the web at www.alcoawheels.com.
How to use this manual
This manual is written in a style called structured text.
Throughout the manual you will find numbers which look
like this (See 3-1, page 18). These numbers are cross
references to other sections of the manual. The numbers
(3-1) refer to section 3, subtopic 1. When you turn to page
18 you will find the section number and subtopic number
under the heading in each section as shown below:
Recommendations
for mounting
tubeless tires
3-1
The cross references will help you find related information
in the manual. For example in section 4-1 you will read
the following sentence...
"Make sure all wheel cap nuts are properly
torqued–check them often (see 4-9, page 29)."
By turning to section 4, subtopic 9, on page 29 you will
find information on proper torquing.
Note: The Alcoa Heavy Duty Wheel Service Manual
contains information for proper service and operation
of Alcoa heavy duty wheels. Alcoa heavy duty wheels
for heavy duty trucks, truck trailers and buses are Alcoa
tubeless wheels with bead seat diameters measured
in .5 inch increments and Alcoa tube type wheels.
Note: Dura-Bright ® wheels produced after November
2002 have Alcoa wheel part numbers ending with “DB”
(earlier wheels have part numbers ending in a 4 or 7)
with bead seat diameters measured in 0.5-inch
increments. Not all Alcoa wheels are available with the
Dura-Bright
® surface treatment.
WARNING