23
ELECTRICAL SECTION
7
GENERAL
– The connection to the electrical net-
work must be carried out by qualified
personnel and must be according to
existing norms.
– The appliance must be connected to
the electrical network verifying above
all that the voltage corresponds to the
value indicated on the specifications
plate and that the cables section of the
electrical plant can bear the load
which is also indicated on the plate.
– The oven can be connected directly to
the mains placing an omnipolar switch
with minimum opening between the
contacts of 3 mm between the appli-
ance and the mains.
– The power supply cable must not
touch the hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
– Once the oven has been installed, the
switch must always be accessible.
The connection of the appliance to
the grounding unit is mandatory.
The manufacturer declines every
responsability for any inconve-
nience resulting from the inobser-
vance of this condition.
FEEDER CABLE SECTION TYPE HO5RR-F
230 V
~
3 x 2,5 mm
2
(**)
(**) – Connection to wall-mounting dis-
tribution panel.
Before effecting any intervention
on the electrical parts the appli-
ance must be disconnected from
the network.
IMPORTANT: this oven must be
connected to a suitable double
pole control unit adjacent to the
oven.
NO DIVERSITY CAN BE APPLIED
TO THIS CONTROL UNIT.
23
ELECTRICAL SECTION
7
GENERAL
– The connection to the electrical net-
work must be carried out by qualified
personnel and must be according to
existing norms.
– The appliance must be connected to
the electrical network verifying above
all that the voltage corresponds to the
value indicated on the specifications
plate and that the cables section of the
electrical plant can bear the load
which is also indicated on the plate.
– The oven can be connected directly to
the mains placing an omnipolar switch
with minimum opening between the
contacts of 3 mm between the appli-
ance and the mains.
– The power supply cable must not
touch the hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
– Once the oven has been installed, the
switch must always be accessible.
The connection of the appliance to
the grounding unit is mandatory.
The manufacturer declines every
responsability for any inconve-
nience resulting from the inobser-
vance of this condition.
FEEDER CABLE SECTION TYPE HO5RR-F
230 V
~
3 x 2,5 mm
2
(**)
(**) – Connection to wall-mounting dis-
tribution panel.
Before effecting any intervention
on the electrical parts the appli-
ance must be disconnected from
the network.
IMPORTANT: this oven must be
connected to a suitable double
pole control unit adjacent to the
oven.
NO DIVERSITY CAN BE APPLIED
TO THIS CONTROL UNIT.
