Prestel HD-PTZ9IP, Руководство пользователя

Страница: 15 / 61

15
PELCO P/D Keyboard RS485 Connection
1. Set RS422 control method on Bottom Dip Switch (See page 15).
2. Set Baud Rate on Bottom Dip Switch to the same as Baud Rate setting on the keyboard you are using. (See page 16).
3.
Reboot the camera by turning it Off/On after the Bottom Dip Switch has been set up correctly.
4. Use PELCO P/D compatible keyboard.
5.
Use preset 95# on the keyboard to bring up/exit camera OSD menu.
6.
Use joystick and Button “OPEN” or “CLOSE” to navigate OSD menu.
7.
To operate keyboard, please refer to the user manual of the keyboard you are using.
Note
For RS-232 VISCA control, this unit does not support daisy chain connection for using multiple cameras.
For control details, refer to Operating Instructions of control keyboard/station software.

You need to match the communication speed between the camera and the joystick controller.

You cannot use the RS-232 connections when using the RS422/485 connection.
Operating Multiple Cameras Using RS-422/485

Using RS-422 (VISCA), you can connect up to 7 cameras.

Using RS-485 (PELCO), you can connect up to 255 cameras.

Using RS-485 (PELCO), all camera addresses must be set up before the connection. You can set the camera
address by operating OSD menu, or by setting the Dip Switch on the bottom of the camera.

In this case, you can use multiple control keyboards.

The joystick of the remote keyboard controller allows comfortable pan/tilt and zoom operations.