PRESONUS FaderPort 8, Руководство пользователя

Страница: 19 / 64

15
3 ProTools (HUI)
3.3 Transport Controls
FaderPort™ 8
Owner’s Manual
3.2.1 Select Button Modifiers
Arm. Pressing the Arm button will allow you to arm track for recording by pressing its
Select button.
Arm All. Press Shift + Arm to arm all tracks for recording.
Solo and Mute Clear. These buttons will clear all solos or mutes in the currently
focused bank of channels.
3.2.2 Select Button Editing Functions
Selecting a track will provide several powerful editing functions. Each
function is dependent on the currently active Fader Mode.
Track Mode
•
Pan. While selected, the Pan/Parameter encoder will control the pan position
for that track. As previously mentioned, for stereo channels, this encoder will
default to control the left pan. To access the right pan, press the encoder.
Edit Plug-ins
• Inserts. When Edit Plug-ins mode is active, the inserted plug-ins for the
Selected channel will be displayed.
See Section 3.6.1 for more information.
Sends
• Sends. When Sends mode is active, the aux sends for the Selected
channel will be displayed.
See Section 3.6.2 for more information.
3.3 Transport Controls
2 1 4 3 5 6
1. Stop. Stops playback.
2. Loop. Engages / disengages Looping.
3. Play / Pause. Starts playback at the current playback-
cursor position. Press again to pause playback.
4. Rewind. Press once to regress playback by bar, second, frame, or base sample
rate depending on mode. Press and hold to regress in finer increments. Press
the Rewind and Fast Forward buttons simultaneously to Return to Zero.
5. Fast Forward. Press once to advance playback by bar, second, frame, or base
sample rate depending on mode. Press and hold to advance in finer increments.
6. Record. Press to enable record ready. Press with Play to start recording
at the current playback-cursor position for record-enabled tracks.