17
The next screen will prompt you to select <<Refill>> for
the probe pen motor to automatically collect the liquid
in the petri dish. Press “Enter” to begin and you will see
the refill process on screen and observe the liquid being
collected into the probe pen.
Once done at 100%, there will be a prompt to purge any
existing air bubbles inside the probe pen.
To do so, turn the probe pen so that the nozzle faces
upwards and tap the side of the probe lightly to allow air
bubbles within the probe pen to move up to the top to be
purged (Fig 1.3.5b).
Fig 1.3.4 Fill/Refill – Step 4
Fig 1.3.5b
Fig 1.3.5a Fill/Refill – Step 5
