14
With the other end of the connector wire, plug it into to the
back of the tester unit where the port is marked with an
arrow (Fig 1.1b).
Be gentle when plugging in the connector wire and always
follow the guidance arrows found on the wire, the probe
pen and the back of the tester unit, making sure they point
towards each other.
ii. Powering up the device
You may choose to power the device on 4 AAA batteries
(alkaline batteries are recommended) or by electrical power
via the Presidium Universal USB Adaptor (not included in
your package).
For more information, refer to Battery Information in the
previous section.
Once powered, you can press and hold the On/Off button to
switch on the device
Fig 1.1b
