PRESIDENT Richard, Руководство пользователя

Страница: 26 / 76

26
finished talking, he said “Roger” in order to prevent his correspondent that
it was his turn to talk. The word “Roger” has been replaced by a significant
beep. There comes “Roger beep” from.
Press PUSH knob ( 6 ) for 3 seconds to enter MENU . is displayed.
1. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the RG BP function.
2. Press PUSH knob ( 6 ) to validate. The current status blinks on display.
3. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to activate
On
/ deactivate
Of
the function.
4. New press on PUSH knob ( 6 ) to validate . The parameter stops blinking. a)
Go back to point 1 to adjust another function or b) Press the PTT switch ( 17 )
to validate and exit MENU . disappears.
5. If no key is pressed, the unit exits MENU after 10 seconds, disappears on
the display.
Default ROGER BEEP is
Of
.
4) TONE
The TONE function is used to change the tone on reception. 11 levels from
-5
to
+5
.
Press PUSH knob ( 6 ) for 3 seconds to enter MENU . is displayed.
1. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the TONE function.
2. Press PUSH knob ( 6 ) to validate. The value of the tone blinks on display.
3. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select a new value.
4. New press on PUSH knob ( 6 ) to validate . The parameter stops blinking. a)
Go back to point 1 to adjust another function or b) Press the PTT switch ( 17 )
to validate and exit MENU . disappears.
5. If no key is pressed, the unit exits MENU after 10 seconds, disappears on
the display.
Default
TONE
is
0
.
5) DIMMER
The DIMMER function allows to adjust the brightness (from
1
to
9
) of the
backlight or to set no backlight (
OF
).
Press
PUSH
knob (
6
) for 3 seconds to
enter MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the DIMMER function.
2.
Press
PUSH
knob (
6
) to
validate.
The value of the
dimmer
blinks on display.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
a new value.
4. New press on PUSH knob ( 6 ) to validate . The parameter stops blinking. a)
Go back to point
1
to
adjust
another function or
b)
Press the
PTT
switch (
17
)
to
validate
and
exit MENU
. disappears.
5.
If no key is pressed, the unit
exits MENU
after 10 seconds, disappears on
the display.
Default DIMMER value is
9
.
6) EMG SET 1
Allows to set the Priority Channel 1.
Press PUSH knob ( 6 ) for 3 seconds to enter MENU . is displayed.
1. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the EMG 1 function.
2. Press PUSH knob ( 6 ) to validate. The channel blinks on display.
3. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the channel.
4. New press on PUSH knob ( 6 ) to validate . The second parameter, the band
blinks.
5. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the frequency band in segments: (see
BAND NAME page 27) .
6. New press on PUSH knob ( 6 ) to validate . The third parameter, the mode
blinks.
7. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the mode.
8. New press on PUSH knob ( 6 ) to validate . a) Go back to point 1 to adjust
another function or b) Press the PTT switch ( 17 ) to validate and exit MENU .
disappears.
9. If no key is pressed, the unit exits MENU after 10 seconds, disappears on
the display.
Default Priority channel 1 is channel 9/AM/band A .
See §
PRIORITY CHANNELS
page 24.
7) EMG SET 2
Allows to
set
the Priority Channel 2.
Press
PUSH
knob (
6
) for 3 seconds to
enter MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the EMG 2 function.
Points
2
to
9
are identical to §
EMG SET 1
.
Default Priority channel 2 is channel 19/AM/Band A .
See §
PRIORITY CHANNELS
page 24.
English