PRESIDENT Richard, Руководство пользователя

Страница: 25 / 76

25
SCAN
(long press)
Press press for ± 7 seconds or until a beep sounds to
activate
the
SCAN
function. The dot between the two channel digits flashes to indicate that
the function is active.
The scanning stops as soon as a signal is detected. The scanning automatically
starts 3 seconds after the end of the transmission and if no key is activated
during 3 seconds. In SCANNING mode, turn the
PUSH
rotary knob (
6
) or
press the
UP
/
DN
buttons (
18
) on the microphone to change scan direction.
Press PTT switch ( 17 ) to exit Scan . The dot between the two channel digits
disappears from the display.
A) DC-POWER TERMINAL (13,8 V)
B) ANTENNA CONNECTOR (SO-239)
C) JACK FOR EXTERNAL OPTIONAL SPEAKER (8 Ω , Ø 3.5 mm)
D) JACK FOR PA OPTIONAL SPEAKER (Public Address) (8 Ω ,
Ø 3.5 mm)
E) JACK FOR OPTIONAL VOX MICROPHONE (8
Ω
,Ø 2.5 mm)
C) MENU
The order of 14 functions is as described in this manual. However, the func-
tion displayed by entering the
MENU
will be the last function modified by
user.
The procedure is the same whatever the function is:
Press
PUSH
knob (
6
) for 3 seconds to
enter MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the function to set.
2.
Press
PUSH
knob (
6
) to
validate.
The
parameter
of the chosen function blinks
on the display.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
modify
the value of the parameter.
4.
New press on
PUSH
knob (
6
) to
validate
the chosen value. The parameter
stops blinking and if the function has more than one parameter, the next
parameter blinks.
5.
If no key is pressed, the unit exits
MENU
after 10 seconds. disappears from
the display.
Note: UP / DN buttons ( 18 ) on the microphone have the same effect as the
rotation of the rotary PUSH knob ( 6 ). PTT switch ( 17 ) validates the last setting
and exists MENU . disappears.
1) COLOR
This function allows to
choose
the backlight color of the display.
Press PUSH knob ( 6 ) for 3 seconds to enter MENU . is displayed.
1. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the COLOR function.
2. Press PUSH knob ( 6 ) to validate. The current color blinks on the display.
3. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 11 ) on the microphone
to select the color. 7 available colors are displayed over and over :
4.
New press on
PUSH
knob (
6
) to
validate
the chosen
color
. The
color
stops
blinking.
a)
Go back to point
1
to
adjust
another function or
b)
Press the
PTT
switch (
17
) to
validate
and
exit MENU
. disappears on the display.
5. If no key is pressed, the unit exits MENU after 10 seconds, disappears on
the display.
Default
COLOR
is (red) .
2) KEY BEEP
When the function is activated, a beep
sounds
when a key is pressed, by
changing the channel etc.
“BP”
appears on the display when the function
is active.
Press PUSH knob ( 6 ) for 3 seconds to enter MENU . is displayed.
1. Turn the rotary PUSH knob ( 6 ) or use UP / DN buttons ( 18 ) on the microphone
to select the KEyBEEP function.
2.
Press
PUSH
knob (
6
) to
validate.
The current status blinks on the display.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
activate
On
/
deactivate
Of
the function.
4.
New press on
PUSH
knob (
6
) to
validate
. The parameter stops blinking.
a)
Go back to point
1
to
adjust
another function or
b)
Press the
PTT
switch (
17
)
to
validate
and
exit MENU
. disappears.
5.
If no key is pressed, the unit
exits MENU
after 10 seconds, disappears on
the display.
Default KEY BEEP is
On
.
3) ROGER BEEP
When the function is active, the icon appears on the display.
The Roger Beep
sounds
when the
PTT
switch (
17
) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a “simplex” communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
English