PrepPal PPM 60, Руководство пользователя

Страница: 6 / 14

6
Check the Planetary Shaft Rotate Direction
Operation Instruction
Attaching the Agitator to the Mixer Shaft(Beater, Hook, Whip)
1. Rotate the bowl guard to the left so it rests in the open position. Excessive force used to open and close the
bowl guard may damage the spring lock and bowl guard micro switch, and will void the warranty.
2. Slide the agitator slowly upwards onto the planetary shaft fitting the shaft pin through the slot in the
agitator .
3. Rotate the agitator clockwise to secure it onto the planetary shaft.
Attaching the Bowl to the Mixer
1. lower the bowl by rotate the bowl lift lever counter‐clockwise to its resting position.
2. lift the bowl by rotating the bowl lift lever clockwise and
a)
slowly position the locking pin (located on the both side of the bowl) into the hole in the both side of the
cradle.
b) lower the bowl onto the pins located on either side of the bowl cradle.
3. Once the bowl is positioned on the cradle, secure the bowl by pulling each bowl clamp forward until the bowl
is locked tight.

Make sure there is not anything in bowl, and no
mixer tool on the shaft, put speed lever on one
speed and turn on the mixer.

Observe the shaft rotate direction is comply with
the arrow showed on the planetary shaft or not.

If shaft rotates in the wrong direction, have a
licensed electric technician switch the electrical
connection and reset.

DO NOT operate the mixer before reading the instruction first;

ALWAYS disconnect or unplug electrical power before leaning, servicing
or adjusting any parts or attachments;

ALWAYS keep hands, hair, and clothing away from moving parts.