PrepPal PPM 60, Руководство пользователя

Страница: 5 / 14

5
Installation
Unpacking and Initial Setup:
Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found
to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of
delivery. Safety unpacking step as below photos:
Step 01: Carefully remove the package material from equipment.
Step 02: Take away the trailer.
Step 03: Anticlockwise rotate the handle to low down the bowl and unlock it.
Step 04: Take away the bowl.
Step 05: Find the wrench for the M12 bolt.
Step 06: Unscrew the M12 bolts inside the four legs.
Step 07: Put two forks into the bottom of machine and protect the bottom.
Step 08: Slowly lift the mixer machine up about 4
”
from the pallet .
Step 09: Pull pallet away from the bottom of mixer feet.
Step 10: Decline forklift, stand mixer on the ground.
Place the mixer on a solid, level surface with sufficient space around mixer to allow for the safe cleaning and
service.
Plug only into grounded electrical outlets matching the nameplate rated voltage.
Note: Do not plug mixer into a power strip or multi‐outlet power cord.