Premier ED-5189PRO, Инструкция по эксплуатации

Страница: 7 / 23

HOW TO USE
• Time Setting Buttons ( / )
When the time is within 1 minute, “01:00”, press once increases 5 seconds,
and press once decreases 5 seconds. When the time is more than 1 minute
“01:00”, press once increases 10 seconds, and press once
decreases 10 seconds.
• After keep pressing for 3 seconds, the buzzer will beep, and the time
display will increase or decrease 5 seconds at the rate 3 flash/second when the time
is within 1 minute. If the time is more than 1 minute, the time display will increase
or decrease 10 seconds at the rate 3 flash/second. The buzzer will beep on every
pressing of the button.
• The longest time setting is “ ” (10:00). When the time is set to “ ”, it
does not operate. It can work continuously by adjusting the cyclic Time Setting as
illustrated below :
00:00 10:00 Remark :
- + 1.In operation 00:00-10:00. 10:00-00:00 repeat
2.Not in operation 00:00-10:00. 10:00-00:00 can repeat
Remark : When the product is in operation, the timer countdowns in time interval of
1 second unit it shows “ ”, and then the product stops.
• Speed Setting (Speed+,Speed-)
Press
or
to increase or decrease the speed by 1 setting. The
buzzer will beep on every pressing of the button. The sequence of the speed setting
is “ 1, 2, 3, 4, 5, 6, 7, 8, 9, H “ and it cannot be adjusted in cycles (i.e. press
button in Speed H, the speed remains unchanged. User can only press to
decrease the speed. Similarly, press button in Speed 1, the speed also
does not change. User can only press to increase the speed.
(The buzzer will beep on every pressing of the button )
(The motor power, voltage and speed at 120V~60Hz input & no load condition
are shown below) :
Remark : Start up of every speed setting is soft start.
5
Time Display