Premier ED-5189PRO, Инструкция по эксплуатации

Страница: 4 / 23

SAFETY PRECAUTIONS
• Before plugging in the appliance, check that the electrical rating shown on the rating
plate corresponds with your household electricity supply.
• Never immerse the unit base of the appliance in water or other fluid, nor rinse it under
the tap, to avoid risk of short-circuit or electric shock. If there is water inside the unit
base, please contact Authorized Service Agent.
• Never put the power cord or plug into water for cleaning. Do not wipe the plug prongs
with damp cloth, nor plug in with wet hands.
• Plug the appliance to the wall outlet properly & securely. Loose plug may lead to
overheat or electric shock.
• If the power cord is damaged, it must be replaced by the manufacturer or its service
agents or similary qualified electricians in order to avoid a hazard.
• Never let the appliance unattended.
• Keep hands and utensils out of the container while the motor is running to prevent the
possibility of severe personal injury and/or damage.
• Do not run the appliance without loading in the blender jar..
• To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
• Do not expose the appliance to source of heat such as a radiator or sun shining
through a window. For good ventilation, do not place cloth underneath the appliance.
• Indoor use only. Do not use outdoor or for commerical purpose.
• Always operate with the lid in place. When processing hot beverages, properly secure
the lid and measuring cup in place to avoid scalding due to spraying of hot liquids.
• This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
• Care is needed when handling cutting blades, especially when removing the blade
from the bowl, emptying the bowl and during cleaning.
• Unplug the power cord from the wall outlet when appliance is not in use, before putting
on or taking off parts, and before cleaning.
• If the motor has overheated, the temperature monitoring system will trigger and the
motor will stop. Switch off and unplug the appliance and let the motor cool down. The
motor temperature monitoring system resets after the blender is unplugged from wall
socket for 45 minutes. In this time, plug in the blender and it can be used again.
• The blade is very sharp, use caution when handling the blade. Do not attempt to
disassemble the blade assembly and touch any rotating parts.
• Any servicing should be performed by an authorized service representative. Do not
attempt to disassemble, repair or modify the appliance.
2