c. To protect against electric shock, do not immerse the power cord, power plug
or the machine in water or in any other liquid. Never handle the plug with wet
hands.
d. Always switch off the unit and unplug the cord when the machine is not in use.
e. Be sure to disconnect the unit during cleaning and ensure no water enters the
motor compartment while cleaning the machine.
f.
Do not allow power cord to hang loose, and make sure that it is straight towards
the outlet and away from spinning drum. Failure to do so might cause the wire
to wrap around the drum, damaging the machine and the cord. Do not allow
cord to touch hot surfaces.
g. Periodically check the power cord for any visible deterioration, and do not
operate appliance if plug is damaged.
h. If the appliance has malfunctioned or has been damaged in any way, call an
Authorized Service Technician for examination or repair.
4. PART IDENTIFICATION
The Tilting Mechanism
The tilting mechanism facilitates the emptying of the machine. It is controlled by the Push Cap
located on the left side of the machine above the knob. The Push Cap must be completely
pressed down in order to release the latch. It must be held down firmly the whole time in order
to be able to tilt the machine. If there is any resistance, stop. Forcing will cause the latch to
break. The machine is designed to have an inch or so of play in its tilting range even when fully
locked. If there is more play, tighten the lock knob found on the right side of the machine.
