Premier Mounts LPSA3747 Скачать руководство пользователя страница 9

Страница: 9 / 17

Installation

Instructions

Page

LPSA3747

Attaching the Flat Panel (75mm/100mm Mounting Points)

LPSA3747

Mounting Hardware

Universal Spacers (see NOTE)

Flat Panel

Mounting Hardware

Use the universal spacers to
compensate for any indentations
or recessed mounting points, if
needed.

Step 1

. Fasten, to 1/2 the depth of the screws,

two (2) M4 x 10mm screws to the top

two mounting points on the flat panel.

Do not completely tighten these screws

at this time.

Step 2

. Insert the head of the screws through

the keyhole slots on the cover plate.

Step 3

. Insert and tighten the bottom two (2)

M4 x 10 Phillip screws to secure the

flat panel to the mount.

Step 4

. Use a Phillips tip screwdriver to

tighten all mounting hardware.

Do not over-tighten the mounting
screws.

It is recommended that the flat
panel rest on a soft and flat
surface while the mount is
attached.

These installation steps should
be performed by two qualified
individuals.

If your flat panel comes with
75/100 mounting points on the
back (see illustration to the
right), the adapter plate will not
be used.

75/100 Mounting Points

Содержание LPSA3747


















Результаты поиска

Содержание LPSA3747

Отзывы:

Бренды по названию

Популярные бренды

Premier Mounts LPSA3747, Руководство по установке

Результаты поиска

Содержание LPSA3747

Отзывы:

Бренды по названию

Популярные бренды