manualshive.com logo in svg

Premier Mounts LPSA3747, Руководство по установке

Поделиться
Скачать
Premier Mounts LPSA3747 Скачать руководство пользователя страница 13

Page 13 

 

 

 

 

 

 

 

 

 

         Installation Instructions

LPSA3747

Attaching the Adapter Plate to the Flat Panel

Step 1

.  Place the flat panel on a soft and flat surface.

Step 2

.  Locate the mounting holes that are on the back of the 

 flat 

panel.

Step 3

.  Place the mounting arms over the mounting points.

Step 4

.  Insert and tighten the mounting hardware using a 

 

Phillips head screwdriver.

If your flat panel has uneven mounting points, 
or recessed mounting points, please use the 
provided universal spacers (please see page 8).

Please see page 8 on how to determine which 
mounting hardware is most appropriate for your 
flat panel.

Step 5

.  At this time, use an M3 Allen wrench and tighten the

 

M6 set screws that are located on the mounting arms 

 (four 

total).

Attaching the Flat Panel with the Adapter Plate

Use the universal spacers to 
compensate for any indentations 
or recessed mounting points, if 
needed.

Step 1

.  Fasten, to 1/2 the depth of the screws, 

 

two (2) M4 x 10mm screws to the top 

 

two mounting points on the adapter 

 plate.
 

Do not completely tighten these screws 

 

at this time.

It is recommended that the flat 
panel rest on a soft and flat 
surface while assembling the 
mount.

LPSA3747

M4 x 10mm Phillips Head Screws

Adapter Plate

Flat Panel

Adapter Plate

Mounting Hardware 
(see NOTE)

Universal Spacer 
(see NOTE)

Mounting Point

Universal Washer

Содержание LPSA3747


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды