Universal Spacer Installation (Optional)
Griplate™ Washer Installation
Premier Mounts’ Griplate™ washers are designed to accommodate the
various M4, M5, M6 and M8 hole sizes required by flat panels.
Do not place excessive pressure on the back of the flat panel, as
this may damage your flat panel.
The Griplate™ washer must be installed between the head of the
mounting screw and the mounting bracket as shown.
The dimples on the Griplate™ washers must be oriented as
follows:
- The Griplate™ Washers installed at the top of the flat panel must
have the points of the dimples facing away from the flat panel.
- The Griplate™ Washers installed at the bottom of the flat panel must
have the points of the dimples facing towards the flat panel.
- Recessed mount points?
- Uneven mounts points?
- A curved back?
- Any obstruction near the mount point?
If
Yes
, install the Universal Spacer. Proceed to the "
Universal Spacer
installation
" section.
If No, skip to the "
Mounting Bracket Installation
" section.
Flat Panel
Griplate
™
Washer
Universal Spacer
Mounting Bracket
Mount Point
Mounting Screw
M8
M6
M5
M4
Griplate
™
Flat Panel
Mount Point
Bracket
Top Griplate
™
Dimple Orientation
Bottom Griplate
™
Dimple Orientation
1˝
¼˝
Universal Spacers allow the user to attach the mounting bracket
to flat-panels which have recessed or uneven mount points. Each
Universal Spacer adds 1/4” to the distance between the mounting
bracket and the flat-panel.
The Universal Spacers must be stacked and oriented as
shown.
The Universal Spacers must only be installed between the
mounting bracket and the flat-panel.
Does the flat panel have:
Installation Guide
AM300-B
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Page 9
13
