OUTDOOR
2 Mt.
2 Mt.
INDOOR
2.
INSTALLATION
2.1
POSITIONING THE AIR CONDITIONER
To maintain the best performance from your unit, prevent breakdowns or hazards, you must
position it correctly. Please follow the guidelines and instruction below in full, as failure to do so
could cause potential installation problems.
-
The air conditioner must be installed on an exterior wall that has access to the out side with a
minimum of 2 metres clearance to the outside.
There should be no obstacles within the 2 metres, to allow circulation of the airflow.
-
The unit must be fitted leaving room all around as illustrated in the paper template.
-
The wall on which the unit is installed must be sturdy and able to withstand the weight of the unit.
After determining the best place for installation as described above, please check to ensure that the wall can
be drilled in the chosen area without interfering with other structures or installations (beams, piers, pipes,
wires, etc.).
Please also ensure that there are no obstacles on the outside of the wall, which may obstruct air circulation
through the drilled holes, for example: plants and their leaves, slats or panelling, drain pipes, overflows and
gratings, etc.). Any obstruction could interfere with the correct perfomance of the unit.
7
