1.5
HANDLING
To avoid any possible damages during transportation the unit is provided with compressor holders
that must be removed before installing the air conditioner (see 2.7).
1.6
PART LIST
1.
FASTENING BRACKET
2.
REMOTE CONTROL
3.
REMOTE CONTROL HOLDER
4.
DRAINAGE PIPE
5
EXTENSION CONDENSATE HOSE
6.
PIPE FASTENING INNER FLANGE
7.
EXTERNAL GRATING
8.
HOT AIR DISCHARGE PIPE (160 mm.)
9.
AIR INTAKE PIPE (150 mm.)
10.
PAPER TEMPLATE FOR WALL DRILLING
11.
KIT OF SCREWS AND CABLE TIE
12.
GRATING FIXING CORD
13.
INSTRUCTION MANUAL
14.
RUBBER PLUG
Any batteries used in the remote control
contain materials, which are hazardous to the
environment.
They must be removed from the remote control
when they reach the end of their life
and disposed of responsibly.
·
Be fully aware of the weight of the unit before attempting to lift it. Take all necessary
precautions to avoid damaging the product or causing personal injury.
·
It is advisable to remove the packing only when the air conditioner has been located in the
point of installation.
·
Carefully remove the adhesive strips positioned on the air conditioner.
·
Packaging components must be disposed correctly and not left within reach of children,
since they are a potential source of danger.
This product has been manufactured to comply
with EEC Directives 73/23/EEC and 89/336/EEC
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice.
5
