9
Step #25
Install storage bracket bar and
secure with nuts.
Step #26
Install organizer clips into desired
holes.
Organizer
clips.
Route and install feeder pigtails
to adapter plate.
Step #27b Route and install local pigtails to
adapter plate.
Dome & Collar Installation
Step #29
Slide end plate gasket onto end plate
and press into groove.
Make sure gasket is seated
in groove of end plate
Step #30
Re-tighten all cable cap bolts (step #11) to
assure that the cable caps are fully seated.
When using a can wrench or nut driver, the
installed torque is 35 to 40 in-lbs.
Step #27a
Step #31
Work the gasket into the groove.
Step #32
Position the dome over end plate.
Step #28
Lubricate all inner and outer surfaces of the gasket.
Lubricate all surfaces around gasket
with silicone lubricant to assure easy
assembly and closure re-entry.
