10
Step #33
Position the collar flat on the work
surface in front of the closure as
shown below.
Step #34
While holding the collar in place,
compress a portion of the end plate
into the dome and insert them in the
groove of the collar near the latch, as
shown below.
Step #35
While holding the collar in place, push
against the end of the dome and
slightly lift and push the other half of
the dome up and over the lip of the
collar with your fingers to fully install
the dome in the collar half.
Step #36
Check to make sure the lip of the
dome is captured within the collar half.
Front Side
Back Side
Lip of dome
is captured
within collar.
Lip of dome
is captured
within collar.
Step #37
Install the other collar half onto
the closure.
Step #38
Secure the collar with the latch and pin.
