SDI-JC-13D2 rev 8-22-22
page 13 of 14
Parts List
Part Number
Description
JC-13D2
Process Bargraph Indicator
16740-3.15S
3.15 amp Slo-Blo, 250 V,5x20mm fuse
90437-KIT
JC-xxD2 Panel Mounting Clip (2)
90434
JC-xxD2 Panel Mounting Gasket
92791
8 pt Terminal Block, line voltage, 5.08mm
92794
5 pt Terminal Block, line voltage, 5.08mm
92795
10 pt Terminal Block, low voltage, 3.81mm
107362-D2-1
JC-x
x
D2 Single Unit, Wall Mount Enclosure, 12h x10w x 8d
107362-D2-2
JC-x
x
D2 Dual Unit, Wall Mount Enclosure, 14h x12w x 8d
107362-D2-3
JC-x
x
D2 Three Unit, Wall Mount Enclosure, 14h x16w x 8d
190751-D2
JC-xxD2 or TG-EL-D4B Adapter Plate, Panel Cutout: 7.5” X 7.6”
190753-D2
JC-x
x
D2 o
r TG-EL-D4B
Adapter Plate, P
anel
Cutout: 8.00” X 10.75”
Specifications
Mechanical:
Enclosure: Nema 12 Faceplate, Indoor Locations
Bezel:
3 7/8 w x 8 h x 1 d
Rear Case: 3 1/2 w x 7 9/16 h x 4 7/8 d
Panel Cutout: 3.61 w x 7.65 h
Weight:
2 lbs
Ambient:
32-131 F (0-55 C)
Altitude:
6560 feet (2000 meters)
Electrical:
Input Power: /-15%, 50/60 Hz, 26 VA
Output Power: 24 Vdc, 300mA max combined load
Terminals: 31,35,37,40,42
Analog Inputs
(3) 16 bit, 5 samples/sec, 50/60Hz filter: -90db
Signal Types 4-20 mA, J T/C, K T/C, 10kThermistor
0-2.3 Vdc, 0-5 Vdc, 0-10 Vdc
Analog Output
(2) 16 bit, 4-20mA, max 650 ohm load
AC Discrete Inputs
(2) 120 Vac, 13 mA typ/ch., opto-isolated
DC Discrete Inputs
(2) Sinking, 33k / 24V internal pull-up
Relay Outputs
(2) SPDT, 120Vac,10 A
Communications
USB: non-isolated, JC_D2Edit config & Firmware Flashing
RS485: Isolated, 4.8 - 57.6 kbaud, Modbus RTU
Ethernet: 10/100 Mb/s, Modbus/TCP