7
1. FIRST SWITCH OFF THE MIXIE.
2. Remove some material which is being ground from the Jar, to decrease the load.
3. Wait for 3 minutes.
4. Lift the Unit and press the RED KNOB projecting out of Bottom Plate.
5. Re-start the Mixie.
If your Mixie stops in usage, due to operation of the Overload protector, then:
AUTO OVERLOAD PROTECTOR
CLEANING
B
ODY
AND
T
OP
C
AP
1. Clean Body and Top Cap with a damp cloth and
wipe dry.
2. Do not use abrasives or water for cleaning.
S
TAINLESS
S
TEEL
J
ARS
1. Fill in 1/2 litre of lukewarm water and a
teaspoon of any mild cleaning powder.
2. Run the unit on Speed 1 for 30 seconds.
3. Rinse and dry.
4.
Always store Jars in inverted position
,
to allow water to drain off.