You will see two WiFi radios listed there. radio0, the first one listed on the page, is used for
tethering. You will note that its disabled and has a name “SSID: WiFi Client” with mode “Client”.
Radio1 is the WiFi radio that you use are currently using to connect to the DataHub. Its the
radio with “SSID: PW-Hub-XXXX” with mode “Master”. We will return to this radio later in the
guide when we discuss how to password protect the WiFi connection to your DataHub and
change its broadcast WiFi name or SSID.
Push the “SCAN” button next to radio0 to list all the available WiFI access points near you.
Select the one you desire to connect to and tap “JOIN NETWORK”. In this example I am
selecting my iPhon in hotspot mode. Next enter the passphrase for the WiFi access point then
tap “SUBMIT” at the bottom of the page.
