PredictWind for display on the tracking portal. Real time tracking can only occur while there is
Internet access, but users can track their global voyages without it.
DataHub provides four different ways to connect to the Internet. These include:
● USB Connected iOS devices
● USB Connected Android Devices
● Ethernet connected router with Internet access such as a broadband satellite device
(Iridium Certus, Inmarsat Fleet Broadband, KVH Vsat, etc) or an LTE enabled router
such as a Pepwave.
● WiFi bridge to MyFi devices such as a Netgear Aircard, Cricket wireless router, Verizon
Jetpack and others.
Multiple Internet connections can be configured at the same time. For example, users could
use a USB connected Android phone as well as an Ethernet connected satellite terminal. When
the satellite phone is on then data is routed through it. If the satellite phone is off then data is
routed through the Android connected device. If none of the two are available then the position
reports are stored internally in non-volatile memory until an Internet connection is available.
Internet via USB connected iOS device
Use a standard lightning iOS USB charging cable to connect your iPhone or iPad to the USB
port on the DataHub.
Once connected iOS will prompt you as to whether the DataHub should be trusted or not.
Select “Trust.
On the iOS device navigate to Settings->Settings->Personal hotspot and enable it as depicted
below.
