background image

Page 7

For technical questions, please call 1-888-866-5797.

ITEM 69674 

        

Sa

Fety

Setup

Opera

ti

O

n

Maintenance

components and controls (cont.)

The following are descriptions of the controls 

on the power panel. Your generator has 

sockets to power your products with circuit 

breakers to protect the voltage flow. 

1. 

i

O

engine Switch:  

Used to enable/disable Generator 

operation..  

  

2. 

ac receptacles:  

The Generator contains several 

AC receptacles to power tools and equipment.   

a. 

3-prong, duplex  

120 volt receptacle  

(neMa #5-20) 

4-prong, twistlock,  

120/240 volt receptacle 

(neMa #L14-30)

WarninG!  

Connect tools and equipment 

only to the Receptacle (120 volt or 240 volt) 

that is compatible with the electrical 

characteristics and rated capacities of 

the tools and equipment being used.  

3. 

On
OFF

circuit Breakers:  

The circuit breaker protects 

the Generator from overloading. The rating of the 

breaker and the load it protects are marked near 

the breaker. Should any of the Circuit Breakers trip, 

the Generator will stop the electricity output.  If this 

happens, unplug all loads from the Generator.  Allow 

the Generator to cool down.  Then, press the tripped 

Circuit Breaker, restart the Engine, and re‑attach 

loads. 

4. 

Dc receptacle: 

12 VDC Receptacle set provides a 

power source for 12 volt DC items.  

5. 

Grounding terminal:  

Prior to each use, set 

up the ground wire (not included) connection 

to the Grounding Terminal to properly ground 

the Generator. See Set up instructions 

to properly ground the Generator.

Содержание 69674

























Отзывы: