Hardware Validation (51765761)
Service Access Code:
51765761
(see
"R20 How To Access Standard Service menus" on
The Hardware Validation menu provides a set of automated hardware diagnostic tests and
calibration procedures used to troubleshoot, calibrate, and verify machine operation. The
diagnostic tests are customized for the particular equipment type and console configuration.
DIAGNOSTIC TEST
TEST DESCRIPTION
Beeper Test
Beeper sounds once every second.
Keypad Test
Press all hard keys and verify change to the pattern. The test will
exit when all keys have been pressed. Pressing down
Workouts
for 5 seconds also exits the test.
LCD Test
Test will light up all segments and sections of the display.
Heart Rate Test
Heart rate is acquired and displayed.
Belt Speed Test
Menu:
Machine Test
>
Belt Speed Test
Range: 0.5 mph to 12.0 mph in 0.1 increments.
l
Press
Go
to start the Belt Speed Test
(IMPORTANT
the
running belt will start movint).
l
Use the SPEED control to very speed.
Incline Test
Use controls to raise/lower incline to verify the following incline
angle A/D values:
l
Nominal value: 13 ±5 @ -2% incline
l
Nominal value: 37 ±5 @0% incline
l
Nominal value: 242 ±5 @ 15% incline
Information Display (65)
Service Access Code:
65
(see
"R20 How To Access Standard Service menus" on page 39
)
The Information Display provides the equipment usage information, software pn/version
information, and Error Log access.
INFORMATION DISPLAY
DESCRIPTION
ODOMETER
The total number of accumulated miles (or kilometers) on
the unit.
This value is stored in the upper PCA in the console so if
the PCA is replaced the accumulated miles would start
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 43
4 Standard Service Menus
Standard Service Menus
