Precor CW-408, Инструкция по сборке

Страница: 12 / 48

CW-408 Assembly Guide
page 12
Assemble the Unit, continued
3 - 5” carriage bolts
3 - washers
3 - hat washers
3 - locknuts
3 - plastic caps
3 - 5” carriage bolts
3 - washers
3 - hat washers
3 - locknuts
3 - plastic caps
Important:
In the following two steps, insert the
bolts so that their heads face outward on both
sides. If the heads of the bolts face inward, their
threaded ends can protrude far enough to damage
the finish on barbell weight plates.
7. Attach the left-hand Weight Bar Plate to the outside
of the left-hand Front Upright using
three 5-inch carriage bolts (J)
three
¹₂
-inch washers (B)
three ½-inch hat washers (K)
three ½-inch locknuts (C)
Wrench tighten and snap a Plastic Cap (L) over
each locknut.
8. Repeat step 7 to attach the right-hand Weight Bar
Plate to the outside of the right-hand Front Upright.