Precor CW-408, Инструкция по сборке

Страница: 13 / 48

CW-408 Assembly Guide
page 13
Assemble the Pads
4 - 3” buttonhead screws
4 - split washers
4 - washers
Assemble the Pads
1. Attach the Back Pad to the Back Frame using
four 3-inch buttonhead screws (M)
four
5 ⁄
16
-inch split washers (N)
four
5 ⁄
16
-inch washers (P)
Wrench tighten.
This completes the assembly of the CW-408.
Clean the Pads and Assembly
To clean the pad, moisten a clean, soft cloth in a mild
solution of soap and water and wipe all the parts
thoroughly. Dry the pad with a clean, dry cloth.
Use the same procedure to clean the main structure.
Frequently vacuum the floor underneath the CW-408
to prevent the accumulation of dust and dirt.