Precor CW-408, Инструкция по сборке

Страница: 11 / 48

CW-408 Assembly Guide
page 11
Assemble the Unit, continued
4. Insert the two Weight Plate Holders into the
Upright Frame. Turn the Weight Plate Holders
so the mounting holes align with the holes in the
Upright Frame.
5. Secure the Weight Plate Holders using
two 1¼-inch buttonhead screws (F)
two ½-inch split washers (E)
two ½-inch washers (B)
two spacers (G)
Wrench tighten.
Note:
For ease of assembly, place a split washer,
a flat washer, and a spacer onto each screw
before inserting the screw.
6. Slide a Bumper (H) onto each end of the Weight
Plate Holders, and press firmly against the Upright
Frame.
2 - 1¼” buttonhead screws
2 - split washers
2 - washers
2 - spacers
Weight Plate
Holder
Bumper