ProtEX-MAX PD8-6310-WM Explosion-Proof NTEP Certified Batch Controller Instruction Manual
30
Display Functions and Messages
The controller displays various functions and messages during setup, programming, and operation. The
following table shows the main menu functions and messages in the order they appear in the menu.
Display
Parameter Action/Setting
Description
setup
Setup
Enter
Setup
menu
Input
Input
Enter
Input
selection
menu
Total
Total
Enable or disable
totalizer features
unitS
Units
Select the display
units/tags
rate
Rate
Select the display units
for rate
total
Total
Select the display units
for total
Gtotal
Grand
Total
Select the display units
for grand total
Dec pt
Decimal
point
Set decimal point for
rate, total, grand total
prog
Program
Enter the
Program
menu
InCAL
Input
Calibration
Enter the
Input
Calibration
menu
factor
K-factor
Scaling
Programs unit to
convert input pulse to
rate in engineering units
sCalE
Scale
Enter the
Scale
menu
Cal
Calibrate
Enter the
Calibrate
menu
Inp 1
Input 1
Calibrate input 1 signal
or program input 1
value
Dis 1
Display 1
Program display 1 value
Inp 2
Input 2
Calibrate input 2 signal
or program input 2
value (up to 32 points)
Dis 2
Display 2
Program display 2 value
(up to 32 points)
Error
Error
Error, calibration not
successful, check signal
or programmed value
T tb
Total time
base
Enter totalizer time base
for seconds, minutes,
hours or day.
T Cf
Total
conversion
factor
Enter the conversion
factor decimal point and
the conversion factor.
mode
Batch
mode
Automatic or manual
batch control
T dly
Time delay
Set time delay for
automatic batch restart
GT tb
Grand total
time base
Program grand total
time base
Display
Parameter Action/Setting
Description
GT CF
Grand total
conversion
factor
Program grand total
conversion factor
GT rst
Grand total
reset
Program grand total
reset mode: auto or
manual
dsplay
Display
Enter the
Display
menu
Line 1
Line 1
Press Enter to assign
the upper display
parameter (default: PV
or rate)
Line 1
Line 2
Press Enter to assign
the lower display
parameter (default:
total)
d-Inty
Display
intensity
Set display intensity
level from 1 to 8
RELaY
Relay
Enter the
Relay
menu
Assign
Assignmen
t
Assign relays to rate,
total (batch control),
grand total, or Modbus
controlled.
Asign1
Assign 1
Relay 1-2 assignment
TotaL
Total
Assign relay to batch
control
Gtotal
Grand total
Assign relay to grand
total
mbus
Modbus
Assign relay to Modbus
input
rate
Rate
Assign relay to rate
precls
Batch total
relay
preclose
For relays beyond the
first assigned to total, a
preclose amount may
be entered.
RLY 1
Relay 1
Relay 1 setup
Act 1
Action 1
Set relay 1 action
1
Auto
Automatic
Set relay for automatic
reset
A-man
Auto-
manual
1
Set relay for automatic
& manual reset
any time
1
(relays
assigned to rate)
LatcH
Latching
1
Set relay for latching
operation (relays
assigned to rate)
1
Lt-CLr
Latching-
cleared
1
Set relay for latching
operation with manual
reset only after alarm
condition has cleared
(relays assigned to
rate)
1
