PD2-6060
Helios Large Display Dual-Input Meter Instruction Manual
43
Scaling the 4-20 mA Analog Output (
Aout
)
The 4-20 mA analog outputs can be scaled to provide a 4-20 mA signal for any display range selected.
To select the channel and source assignments the analog outputs are assigned to, see
Analog Output
Source
No equipment is needed to scale the analog outputs; simply program the display values to the
corresponding mA output signal.
The
Analog Output
menu is used to program the 4-20 mA outputs based on display values.
For instructions on how to program
numeric values see Setting
Reset Menu (
reset
)
The
Reset
menu is used to reset the maximum or minimum reading (peak or valley) reached by the
process; both may be reset at the same time by selecting “reset high & low” (
rst HL
). The tare value
used to zero the display may be reset by selecting “reset tare” (
rst tr
).
Control Menu (
Contrl
)
The
Control
menu is used to control the 4-20 mA analog output and the relays manually, ignoring the
input. Each relay and analog output can be programmed independently for manual control. Selecting
automatic control sets all relays and analog output for automatic operation.
Contrl
Auto
man
a out
rly 1
rly 4
off
on
Contrl
Contrl
man
man
man
a out
rly 1
rly 4
16.000
www.
GlobalTestSupply
.com
Find Quality Products Online at: