Precisa 490 IB Series, Руководство по эксплуатации, Страница: 37 / 46

13 Data transfer ■
35
En
gl
is
h
• Pin configuration of the RJ45 socket
13.2 Remote control-commands
Balance RJ 45 D25 / D9 Peripheral device
RS 232 in 6 2 / 3 RS 232 out
GND
5 7 / 5
GND
CTS
3 20 / 4
DTR
DTR 7 5 / 8 CTS
Balance RJ 45 Remark
n.c. 1 not connected
RS 232 out 2 Out (V24)
CTS 3 In (V24)
VDC 4 Out (9..16V)
GND 5 0V
RS 232 in 6 In (V24)
DTR 7 Out (V24)
EXTBUS 8 In (5V, logic)
Command Function
ACK Acknowledge n=0 off; n = 1 on
CAL Start calibration
D.......... Describe weight display (right-aligned)
DN Reset weight display
@......... Describe Info display
@N Reset Info display
In Set FLOATINGDISPLAY time nn=0 t=0.04 s
n=1 t=0.08 s
n=2 t=0.16 s
n=3 t=0.32 s
N Reset balance
OFF Switch off balance
ON Switch on balance
PCxxxx Enter anti-theft code
PDT Print out date and time
PRT Start printing (Press « PRINT » key)
PST Start print status
Pn (ttt.t) Set print mode
n=0 Individually print each value (unstable)
n=1 Individually print each value (stable)
n=2 Print after change of load
n=3 Print after each integration period
n=4 Print on time basis in s (ttt.t)
R%k Set current weight=100%
with k=0...7 decimal places (k=A: use automatic positioning of decimal point)
REF%k rrr Set reference weight rrr for 100%
with k=0...7 decimal places (k=A: use automatic positioning of decimal point)
Rnnn Set current weight=nnn items
REFrrr Set reference weight rrr for 1 item
Sn Set stability n n=0 low
n=1 medium
n=2 high
8 7 6 5 4 3 2 1